Thread: e34croak's XS650
-
03-13-2023 #1e34croakGuest
e34croak's XS650
Hello!
I just picked up 2.5 Yamaha XS650's two weeks ago. The one is nearly complete and i'll likely leave it alone for the most part. I'll have to get a new seat and some other small bits. The second one with the mag wheels i'll be installing a hardtail kit. The 0.5 one is just an engine in the cradle with a title. We'll see what comes of that..
I was excited to see how it would look. The bung is not installed and nothing is welded. My plan is finish grinding and removing the existing neck gussets to prepare for welding in the replacements. After everything is cleaned up to my liking on the frame I will reinstall the engine and tack everything in place. Then I'll remove the engine and perform the final welding and install the vertical center tube bung as well.
Thank you!
-
03-13-2023 #2e34croakGuest
-
03-13-2023 #3e34croakGuest
Last edited by e34croak; 03-13-2023 at 4:07 PM.
-
03-22-2023 #4Junior Member
- Join Date
- Mar 2023
- Posts
- 7
Hardtail Welded.
-
03-24-2023 #5Junior Member
- Join Date
- Jan 2022
- Posts
- 22
looking awesome man. you gonna run mags and disc's, or go for something with drum and spokes?
-
04-17-2023 #6Junior Member
- Join Date
- Mar 2023
- Posts
- 7
More than likely I'll run the mags. No front brake with a rear disc.
Originally Posted by deezboltz
-
04-23-2023 #7Junior Member
- Join Date
- Jan 2022
- Posts
- 22
Originally Posted by e34croak
More than likely I'll run the mags. No front brake with a rear disc.
-
04-23-2023 #8Junior Member
- Join Date
- Jan 2022
- Posts
- 22
nice. sometimes I think about taking the brake off my front mag. they look so good like that Originally Posted by deezboltz
-
04-30-2023 #9Junior Member
- Join Date
- Mar 2023
- Posts
- 7
That thing looks sweet!!
Here’s current progress
Reply With Quote
