Thread: Ultrasonic cleaners man
Hybrid View
-
08-09-2022 #1Senior Member
- Join Date
- Oct 2016
- Posts
- 303
Ultrasonic cleaners man
I’m probably late to the game with this shit in terms of realizing this is more affordable and practical than I had thought. Ultrasonic cleaners for parts cleaning, looks like a solid investment. I was looking at the 22L rigs for $200+ and it seems like a solid purchase for the garage. Anyone mess around with the Vevor cleaners or have recommendations?
Last edited by ExplodingCoffinEmporium; 08-09-2022 at 5:18 PM.
-
08-10-2022 #2
i will tell you the smaller ones from ebay work but not worth more than $50 of cleaning.
theres a YouTube channel about chainsaws. chainsaw mike or something like that.
he has alot of sonic cleaner videos.
you can use jars and toss into the fluid.
plastic jars don't reverberate frequencies like glass.
glass jar with gasoline in it works super good. put jar in plain water in the tank.
iv done this with simple green. it dies anodizes aluminum in a away though FYI.
the key would be to use the fright solvent for the right metal/plastic.
heat does help if its grease.
they are loud and annoying.
put them in a vented cabinet for quietness.
you don't have to have the lid on them to have them work.
water can be pretty hot wen done....like real hot.
always make sure you have plenty of water in it . if the water is low you can burn the cleaner inducer thingy out.
may not be a product suggestion.
but i would suggest not buying a small one.
-
08-10-2022 #3
Good move asking for direct experience with them before you purchase.
I've used them in a lab environment. But not in a garage. I dunno how they would work?
I suspect they would be effective against hard deposits and almost useless against rubbery grease.
They work at high frequencies and will do surprising things, like shake the carbonation right out of a drink and shake the screws out of a pair of eyeglasses.
But I suspect anything "rubbery" would be unaffected.
-
08-10-2022 #4Senior Member
- Join Date
- Oct 2016
- Posts
- 303
Good move asking for direct experience with them before you purchase.
I've used them in a lab environment. But not in a garage. I dunno how they would work?
I suspect they would be effective against hard deposits and almost useless against rubbery grease.
They work at high frequencies and will do surprising things, like shake the carbonation right out of a drink and shake the screws out of a pair of eyeglasses.
But I suspect anything "rubbery" would be unaffected.
-
08-11-2022 #5
We used a cheap one at the shop where I worked and the extra agitation was well worth it to speed carb cleaning. They should really be called "vibratory fluid cleaners" but ultrasonic sounds cool.
I didn't feel the need to own one since I've many ways to clean metal and soaking in undiluted Pine-Sol works better than the pathetic crap they auto stores now sell as carb cleaner (and you can flush it down the sink or toilet to clean the pipes too).
The little cleaners are annoyingly small. A vibratory mechanism to shake a stainless steam table tray or tub of larger size would be more desirable for doing stuff like racks of carbs.
-
08-12-2022 #6
I picked up an Eastwood vibrating cleaner some years ago, works well for cleaning nuts and bolts and such, but I can't recall if an S&S Super will fit in there.
-
08-12-2022 #7
Share This
Quick Navigation
Junk Pile
Top
- Site Areas
- Settings
- Private Messages
- Subscriptions
- Who's Online
- Search Forums
- Forums Home
- Forums
«
Previous Thread
|
Next Thread
»