92 hurley smavidison redo

Collapse

Desktop Ad Forum Top

Collapse

Mobile ad top forum

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rabies
    Member
    • May 2019
    • 88

    #31
    made a sissy bar bag out of Carhartt material i had laying around.
    draw string thing from army PT shorts i had. bungee strap from leg holster. Nickle for a button. works great.




    i think im going to take the saddleman seat back under the 90 day return to JPcycles. its pretty stiff. nothing over the one i had better.
    not worth $450 to me.
    ordered rubber shift/brake pegs. my boots are turning silver from the TCbros mid controls.
    also need a heat shield. im melting my pants :/
    starting to feel slow. i need mo powa. i thinks me need a bigger bike....? softail sport glide? new shiney stuff is difficult for me.

    Comment

    • rabies
      Member
      • May 2019
      • 88

      #32
      Iteration # lost track

      Iteration # lost track.
      lets chop the cam cover because we are drop outs.
      had to drain the black liquid stuff.....






      HEALTHY YES?



      TO DO:
      new exhaust gaskets
      fresh oil and filter of course.
      cut cam cover.
      get new stand off ignition bolts.
      install ramjett manifold.
      fuel tank treatment and sand/paint bottom.
      new fuel hose
      install rubber shift/brake pegs.

      Comment

      • rabies
        Member
        • May 2019
        • 88

        #33
        chopped cam cover. found my uncles handband. works super good.


        cut too much. found something that was plugged with a brass slug.
        so i JB welded a bolt in and cut it off.


        whoever tried to weld this supertrap expansion band thingy on need fired.


        a run to JP cycles and return the saddleman seat. and bought this stuff.


        so....ebay seller said it would fit. it didnt.
        the Ramjett manifold i bought says super E. yes would fit carb but is for big twin. not a sportster.

        Comment

        • rabies
          Member
          • May 2019
          • 88

          #34
          short road trip 100 miles and camped out in some place down gravel and dirt roads.



          feel like its hipster stuff but it keeps my pants from melting or being burned.

          Comment

          • rabies
            Member
            • May 2019
            • 88

            #35
            Still after a new front tire on an alloy wheel with new wheel bearings, there was some lack of tightness.
            Upon heavy decel, weight to the front the neck would rattle.
            So i proceeded to do a handlebar delete.



            the green grease is from me, the other day i found a zerk fitting. far to late for the bearings though.


            after a few minutes of banging on the stem to come loose i realized i had this in the corner still.


            new bearings and shined up fer ya petral luvn frends.

            Comment

            • rabies
              Member
              • May 2019
              • 88

              #36
              lithium battery 12cell wont stay charged enough. stator works. agm battery works fine.
              seat bolt fell out my seat.
              leather grip came loose. ripped it off.
              losing patience.
              bought grips.
              going to cotter pin my seat bolt.
              warranty claim on my battery.

              Comment

              300 mobile ad bottom forum

              Collapse
              Working...
              ;