I've just changed to some 6 over fork tubes on my 96 XL 120 Custom, and ready to reinstall. The top pinch bolts are holding the tubes in no problem, but the lower pinch bolts are not closing the trees all the way. I tested them by lowering the tube so that I'm only fastening the lower trees to the tube (30-35ft lbs) and the tube slides right through.

I should mention I switched to a shorter hex head bolt because I removed my front signals (the signals mounted to the trees with the same bolt).

Thanks everyone

Click image for larger version. 

Name:	IMG_8315.jpg 
Views:	11 
Size:	282.5 KB 
ID:	86185