CHOP CULT HOME
Email Password
Search
  1. #1

    Default Cone Shovel Mid controls Placement

    Iím trying to figure out how to mount Mids on a cone Shovel. I have seen photos of people putting tabs on the frame which seems to be the best route. Any recommendations? Any certain tabs to get? Any help is appreciated!

  2. #2
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Nov 2009
    Posts
    1,102

    Default

    doesn't fabricator kevin sell a set up for that? I think it's for an open primary though

  3. #3

    Default

    I’ll def check it out. I’m running an open belt. 1.5” something I forgot to put in the original post haha

  4. #4

  5. #5
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2009
    Posts
    855

    Default

    You’re talking about floor board tabs I’m guessing. They’re often removed to make room for pipes. There’s the Midesota Mid pegs,or visionary Cycle products have a nice kit as well

  6. #6
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Nov 2009
    Posts
    1,102

    Default

    If you get or read The Horse magazine there is a 3 part article in the June ,July and August 2015 issues on how to make a set that bolt right to the front trans plate mounting holes I did see a set online today that started at $600 from main drive cycle. They look like they are pretty nice ones too

  7. #7
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Nov 2009
    Posts
    1,102

    Default

    look at visionary cycles too

  8. #8

    Default

    Quote Originally Posted by Pdriskill10 View Post
    I’m trying to figure out how to mount Mids on a cone Shovel. I have seen photos of people putting tabs on the frame which seems to be the best route. Any recommendations? Any certain tabs to get? Any help is appreciated!
    I run the factory transmission mount for brakes.
    And I just found out about this:
    http://speedclubinc.bigcartel.com/pr...uper-shiftertm
    That’s the route I would go. For the money and looks, I don’t think you can do any better.

  9. #9

    Default

    I literally just ordered one of those, and the stock brake! Got the brake control in tonight and on... just waiting on the shift side now!

Share This



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in