I would like to thank Travis at Chop Source for making this giveaway possible. One lucky member will be winning this complete Frame Jig Kit.
The Full Frame Jig Kit includes all of the fixtures and hardware you need to get your table-top motorcycle frame jig started. You need to supply about 21.5' of 2"x3" or 2"x2" tubing (1/8" wall) for the jig. The frame jig kit bolts together so you can break it down and store it easily when you aren't using it. No drilling or welding required except for the feet. The neck fixture will accommodate rakes from 15 degrees to 60 degrees.
You will receive the following:
- Neck Fixture
- Axle Plate Fixture
- Two Base Clamps
- 1018 Mild Steel Neck Cones
- Feet Kit
- Adjustable Width Fixture (shown) or Internal Center Fixture
- 3/4" Threaded Rods and Spacers (shown)
Chop Source Full Frame Jig Kit - $299.95 value
For complete details of the Chop Source Motorcycle Frame Jig Kit or to view assembly instructions visit www.ChopSource.com
Travis will give the winner a store credit for $299.95 which gives you a few options for the kit. He will also cover shipping within the U.S. and give a $21.50 shipping credit if the winner is international.
Want to win? Just comment Chop Source rules below to enter. We'll announce the winner on June 12, 2017. Please give Chop Source a follow on Facebook and Instagram for their kind donation and support for the CC community!
Good luck!
Comment