CHOP CULT HOME
Email Password
Search
  1. #1

    Join Date
    Jun 2016
    Posts
    18

    Default 83 kz440 hardtail question

    So I picked up a TC Bros universal weld on hardtail kit. It came with 20mm slotted axle plates. The axle on the 440 is smaller, 17mm. Is this going to be a problem? Should I cut the original plates off the swing arm, or will it be okay to have that size difference. This is my first chop, so its all new to me. Thanks!

  2. #2
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2012
    Posts
    12,048

    Default

    It will be ok......... Making sure you weld it on straight is more important......

  3. #3
    Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Nov 2013
    Posts
    82

    Default

    check you tube there is a video

  4. #4
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Mar 2010
    Posts
    277

    Default

    Voodoo Vintage has Oilite bronze 20mm to 17mm axle adapter bushing on his site. Think that would be the route I would go.

    Scroll down about half way on http://www.voodoovintage.com/products.html

  5. #5

    Join Date
    Jun 2016
    Posts
    18

    Default

    Thanks!

Share This



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in