shovelhead carb mount.

[gusjustgus]

Okay, I thought this would be EZ to find.

I just need to know the bolt sizes I need to mount the S&S Cycle Carb Support Bracket, on my shovelhead.

There is a small screw hole under the second rocker box cover, what size bolt to I need for that. And what size do I need for the SS Super E carb.


I let it bounce around all summer but now I want to lock it down.

I did go to the dealer who told me "I have no idea were to look that up".

So once again the deal let me down, so I turn to the real "knowable service department".

Thanks

[some1else]

just put a new stainless one on my bike damn if I can remember I just grab a few at the hardware store they are cheap enough,if you got something laying around that fits .who doesnt have a box of misc. shit around.

[docmel]

Ride to your local hardware store and get what you need. VERY common size, very cheap, I just cant remember what size they are
at the moment. The carb to manifold bolts are allen heads: Be sure you get the same type. It makes it easy to take on/take off. But you
could go hex head if you wanted: Be DAMN sure they aren't too long Take look, you will see what I mean

The bracket bolt you can figure out

[Dragstews]

There are the brackets that run from the head to the air cleaner backing plate...

But for a easier way of supporting the carb, would be one of these...

[thebcb]

Viva La Cantina!!!!!!



#fuckdatniggaleslie
#fuckdatniggadusty
#fuckdemniggashowclass
#vivalacantina