CHOP CULT HOME
Email Password
Search
  1. #1
    Junior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    May 2015
    Posts
    6

    Default Getting Closer! Need some help/advice with wheels

    I have '06 mags on my '80 ironhead hard tail.

    I need some spacers for the rear, I'm concerned about where to measure from and if my axle adjuster will work in it's current configuration.
    Click image for larger version. 

Name:	WheelSpacerDiagram.jpg 
Views:	17 
Size:	349.4 KB 
ID:	60618

    My thoughts are to simply measure from the edge of the axle plate to the inner wheel bearing and get a single spacer cut to that length. I'm a little concerned at how the axle adjuster would interact with that spacer since it would basically be pinching the spacer on the axle and causing friction.

    I'd like to know if I'm headed in the right direction with the measurements and get some advice on adjusters.

    Thanks guys!!

  2. #2

    Default

    Yes it will put pressure on the spacer---but---the axle and the spacer do not turn.

Share This



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in