Help: wiring harness install 69 yamaha AT125

[Featherston]

How in the hell do i begin to install a wiring harness on my 69 yamaha AT 125 Enduro?

[Jetblack]

Bump...answer.

If you are replacing it with a stock harness; lay it along side the old one and switch plugs cleaning terminals as you go then pull the old one. Otherwise, get some masking tape and write where every single wire went to.

If you mean making a new harness with less wiring; maybe someone will answer or get a diagram and start eliminating out what you don't want or need on paper post it up here and we will have a looksee to see if it'll work. Then take that to the real harness.