CHOP CULT HOME
Email Password
Search
  1. #1
    Junior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Mar 2012
    Posts
    3

    Default 04-06 sportster 1200 stripped wiring diagram HELP

    First off I would like to introduce myself, my name is Ryan and I own and operate Cannonball Custom Cycles out of Redding California. I am new to posting on the site however I have been a lurker around here for a while.
    I am doing a rigid frame 04 sportster 1200 bobber build for a customer right now and I am having a hell of a time finding a stripped down wiring diagram/schematic anywhere. The more stripped down the better.
    If anyone has one or knows where I can get one I would greatly appreciate it.
    Thanks
    Ryan

  2. #2
    Junior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Dec 2011
    Posts
    7

  3. #3
    Junior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Mar 2012
    Posts
    3

    Default

    Thanks Jeffco, will this work for the 2004? I was under the impression the 2004-2006 non efi was different that the earlier bikes. Correct me if im wrong.

  4. #4
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Aug 2011
    Posts
    141

    Default

    I am in the same boat on my 06. Theres a ton of info on 03 and older, and 07 and newer, but not much at all for 04-06. I'm going as bare as possible (key and start switch), but wiring is chinese to me.

  5. #5
    Junior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Mar 2012
    Posts
    3

    Default

    Yeah Shitbike, I am looking for the same thing, just the bare minimum on wiring.

  6. #6
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Mar 2011
    Posts
    2,585

    Default

    sorry not any help other than I can confirm the wireing on 04-06 xl is different. there is nothing in the nose cone. no rotor no sensor. there is a crank position sensor on front of the engine by the oil filter.it has an ignition module under the seat, a bank angle sensor and a map sensor. my suggestion would be to find all these componants aling with statot and voltage regulator, and keep all these wires intact and run your own circuits for lights.

Share This



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in