Voodoo Vintage

[billdozer]

[voodoovintage]

Big thanks to Billdozer for throwing us in here!

Many posts to come, but introductions first!

Voodoo Vintage Fabrication is located in beautiful Austin Texas. We are a small shop focused on hand-crafted products to make life easier for the Chop Cult hordes! Our specialty is custom rigid frames for early Japanese and European classics. We also offer a line of accessories including seats, custom front ends, handlebars, etc...

Keep in touch with us for updates on exciting new products! We're making the custom world available to the working man!

[MONSTERCRAFTSMAN]

Yeh, Check out the craftsmanship and creativity coming out of David's hands and mind at Voodoo Vintage. We'll be distributing all the mayhem up at the Monster headquarters and working closely with him on future product development. Stay tuned and keep it real.

-Jon
Monstercraftsman.com

[voodoovintage]

We are excited to announce the release of our long awaited development... The Voodoo Vintage Velocity! It's a traditional leaf front end 100% TIG welded and engineered beyond standards. The Velocity has sufficient space between axle plates to install a double flanged wheel and has TWO hidden brake stays and two hidden fender mounts. It will use a standard Harley Davidson springer top clamp (triple tree) and a typical 1" steering stem. The VELOCITY will be available in raw steel or powder coated black gloss.

We will also have a hardware kit that includes a chrome triple clamp and 3/4" axle with chrome nuts sold separately for $125

VELOCITY Leaf Front Forks:
Raw Steel Finish: $1195
Black Powder Coat: $1295

[FerrumDiscipulus]

where in austin are ya'll at?

[voodoovintage]

Our shop (in transition) is on Pond Springs Road. We will be moving into a new unit in the next few weeks, so things are a little distraught at the moment...

[voodoovintage]

[FerrumDiscipulus]

Our shop (in transition) is on Pond Springs Road. We will be moving into a new unit in the next few weeks, so things are a little distraught at the moment...

cool ya'll are in my neighborhoods!

[voodoovintage]

[voodoovintage]

Sometimes you feel like a NUT! Sometimes you don't!

Wait a minute... No... You ALWAYS feel like a NUT!!!

Voodoo Vintage along with Monstercraftsman has released the NUT JOB L.E.D. tail light!

Billet aluminum construction with removable and replaceable light assembly. 1/4" mount holes on back also fit the Voodoo Vintage line of plate brackets with the Ford tail light mount. Dimensions are 2-1/4" wide (flat to flat) and 1-1/2" deep.

The removable aluminum housing hosts 16 super bright LED's with a clear acrylic cover for additional protection. Three wire connection for standard running and brake light operation.

Expect this beauty to pop up on Monstercraftsman any given day. The individual NUT JOB tail light retails for $69 or you can have it paired with one of the Voodoo Vintage plate brackets with the Ford tail light mount for only $119.

Feel free to request information or to pre-order!!!

david@voodoovintage.com



















8-)

[voodoovintage]

[voodoovintage]

[voodoovintage]

[voodoovintage]

The MK4-A has derived from our original SHORT CHOP design for the Suzuki Savage and has evolved to what you see now. The original design was first introduced in 2008 with many builds in the Savage community. Now it proudly graces the XS crowd!

The low-profile backbone and 38 degree rake offer an aggressive stance with definite flow in the design. The goose neck configuration and monolithic seat post are just a few "signature" design elements continued in our ever expanding gallery.

Approximately three inches of stretch with a substantial drop allow up to 22" rims. Designed for 2" under stock front suspension and a ground clearance of 3.5 inches, the MK4-A will fill the void in production frames for the XS650.

More information and photos coming soon!

[voodoovintage]

Had enough of the "shop gremlins" running around...

Our latest product dedicated to chasing away the BAD MOJO!

The MK25 Weld On Hard Tail!













You can find pricing and ordering information at the bottom of the page HERE!

[voodoovintage]

Here we go...



To be released October, 2012.

The MK7 for the Triumph T120/T140 and the Ironhead 883/1000.
Constructed of 1.25" DOM backbone/seat post with 1.125" struts,
railing, and dual down tube. Water jet 3/8" axle plates with 1/4"
gussets and brackets and fully TIG welded. Twin neck gussets
with speed holes! Complete with Harley style stainless steel
press in neck cups!

Check our web site or our FB page for more details and
development information...

[voodoovintage]

We, at Voodoo Vintage, anticipate tremendous change over the coming year.

We are scaling back on miscellaneous products and focusing on what we do best!

We are kicking off the new year by introducing a new concept in custom motorcycle frames by offering all our current designs in a "generic" format called the BARE NAKED FRAME!

The frames will ship fully welded with 20mm axle slots and will be available in two interior widths... 8.5" and 10" (for inline fours).

Welding your own motor mounts and neck tube will save a lot of hard earned dough and make a custom frame "obtainable" to a typical budget.

Expect MONSTERCRAFTSMAN to carry these in stock and ready-to-ship by mid February!

[Slimey1]

That Model 7 frame is beautiful.

[MotoMadness]

Sick Frames. Is that the Harbor Fright ram on the tube bender back there? I did the samething hahaha

[voodoovintage]

That Model 7 frame is beautiful.

Thank you!