Here's a sweet old Cheetah twisted sissy bar with matching back pad, for a swingarm bike. There's a little patina on the chrome but I haven't polished it up. It's in good sha...

Here's a few neat old vintage lights up for grabs- shipping not included. 6 1/2" Unity spotlight, lots of patina, no cracks or dents. The bucket is brass and the ring is steel. Run as is, ...

Decent front wheel off a '77 XS650. Should fit all years with a disc. Some rust on the spokes but solid and spins true. I'd clean it up, paint it, and polish the lip of the aluminum ri...

'72 Triumph frame, swimgarm, shocks, pegs, brake lever, and XS650 trees with a Triumph stem. Good #'s but bill of sale only (it's actually really easy to get a title in NY for pre...

Here's a few neat old vintage lights up for grabs- shipping not included. 6 1/2" Unity spotlight, lots of patina, no cracks or dents. The bucket is brass and the ring is steel. Run as is, ...

Here's a really neat little old paint chopper tank. It looks about 1.5 to 1.75 gallons- smaller than a Wassell or Sporty tank (see first pic). I've only seen a couple others, one was f...

Here's a little gas tank off a Benelli of some sort. It's probably 3/4 gallon? Pretty cool old chrome and paint. It has a working petcock, but no cap. Be uber cool as you stop for gas ...

Here's a sweet old Cheetah twisted sissy bar with matching back pad, for a swingarm bike. There's a little patina on the chrome but I haven't polished it up. It's in good sha...

Looks like a 60's Honda Dream CA77 tank. No badges and a small ding on either chrome cover, but has a working petcock, gas cap, and looks almost new inside. Might look cool on a custom cafe...

First is a fender light with red glass lens. It's got some patina in the paint, but it's all solid and the glass is in good shape. It's wired for a single filament bulb but wouldn...

Here's a few neat old vintage lights up for grabs- shipping not included. 6 1/2" Unity spotlight, lots of patina, no cracks or dents. The bucket is brass and the ring is steel. Run as is, ...

Decent front wheel off a '77 XS650. Should fit all years with a disc. Some rust on the spokes but solid and spins true. I'd clean it up, paint it, and polish the lip of the aluminum ri...

I might regret this but I found a Panhead project that I'd like to get into so I'm putting the Shovel up for sale. The bike was completely rebuilt a couple of years ago and has 3000 mi...

'66 Triumph Bonneville cases- seem solid but someone did some welding under the primary side which may affect the adjustment of the chain tensoner. Also has the typical chain slap break tha...

'72 Triumph frame, swimgarm, shocks, pegs, brake lever, and XS650 trees with a Triumph stem. Good #'s but bill of sale only (it's actually really easy to get a title in NY for pre...

I'm not sure what this tank is off of, but it's got a neat shape and is nice and small. I have it pictured next to an XS650 Special tank for comparison. It has one soft dent, and the i...

HD rear wheel- looks like a Shovelhead/ Ironhead dual flange disk brake wheel? Missing 1 spoke, and some rust on the rim, otherwise in good shape. I'll remove the tire for shipping, or can ...

I was told these were off a SOHC CB750 ('78 and earlier) but would fit a DOHC ('79 and later), but I'm not sure. I don't know a lot about Honda 750's- take a look for yo...

'72 Triumph frame, swimgarm, shocks, pegs, brake lever, and XS650 trees with a Triumph stem. Good #'s but bill of sale only (it's actually really easy to get a title in NY for pre...

'66 Triumph Bonneville cases- seem solid but someone did some welding under the primary side which may affect the adjustment of the chain tensoner. Also has the typical chain slap break tha...

Nice set of Holy pegs with mounts- $30 shipped Heavy aluminum chopper pegs with old chrome- Heavier duty than any Andersons I've had- $45 shipped Old Ironhead (?) seat- could fit on anyth...

Here's a set of old 7/8" bars. I'm not sure who made them but they look like they might be Flanders or Stelling & Helling bars? Whoever made them they are a cool vintage bend, mid-ris...

Top one, needs some love on the bolt holes, or cut and make new ones- $15 shipped Middle one, solid and easy to mount on anything- SOLD Lower one, get creative with the mount- SOLD

OK, I've been saving these for a while but I need the cash. First is a Hallcraft 19" radial laced spool wheel. Some pitting here and there but very presentable. I took the bearings out to g...

Here's an old Bates/ KD (same thing) 5 3/4" headlight. It has one small ding and some patina that should clean up. Pop in a bulb and go! $30 shipped