If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
ChopCult is the online mecca for motorcycle enthusiasts, with active, content-rich forums covering all makes and models of motorcycles, exclusive articles.
Last edited by TroyFab; 11-26-2012, 10:36 AM.
Reason: price drop
Fresh batch of Triumph Conical Speedo spacers just made up. Fit 1971 - 1973 conical hubs.
Get rid of that speedometer and use "The Force" Luke.
$38.00 shipped cont. USA
NEW PRODUCT RELEASE!! Triumph Primary Case Protector
Product Description
It does just what the name says, Primary Case Protector. It slides right into your primary case and bolts in to the hole already there, with one bolt. It serves as a buffer between your chain and cases. This will stop chain slap from putting grooves in your cases and eventually ruining them.
I attached a couple of pics., the first one is an installed pic. The angle faces down toward the chain and is facing the rear sprocket. This is designed to work as a lead in for the chain into the primary case and will protect cases from chain slap. The second one is what you can expect it to look like after it starts doing it’s job. The outer edges will wear the UHMW until the rollers on the chain hit. Once the rollers take over the wear stabilizes and your cases are now protected The one in the pic has been on my bike for over 2 years.
You have spent too much money rebuilding that motor, don’t let you’re chain wreck it on your first ride
Fits all Hardtails, including Bolt-on Style. Bolts right on to the 1″ bottom frame cross tube. Slides left to right and pivots up and down.
* 15 Tooth “MADE IN USA” Idler sprocket (SEALED BEARING), This is for 530 chain.
* CNC Machined from 5/8″ steel.
* Sandblasted ready for paint or powdercoat.
* No need to weld anything , just bolts right on.
* Note: Please verify you have 1″ tubing for a cross tube.
Note: 1 1/16" available also.
I have a couple of this style left. Same as the latest generation except for it uses a bolt and nut rather than a tapped hole. This is for 1" frames. 530 chain.
$65.00 shipped cont. USA
Comment