Putting a push start button can be a good way to free up your bars from switch clutter...until you burn your hand again and again with those fuckin pipes. Solution: brass knuckle pull start, motherfuckers!!!!! I made this one for my homie Tim, so check it out!!!
Last edited by billdozer; 09-11-2010 at 10:23 PM.
I'm going to be needing one of these for "The Shrimp".
Sweet! I expected to see a lawn mower pull string when I read the title.
Fuckin ay man, that's brilliant!!
You just solved one of my rewire issues.
Wompy, I moved and renamed this post so you are entered in the Choptember contest. This is a great mod.
You want a how-to? Here's your how-to:
Find suitable material, make a template from a manila folder, cut it out, trace, cut, file, sand or do what you have to do to get it to the shape desired. I cut mine on the band saw. One hint for ya'll: drill holes before cutting to shape so you can hold it better on a vise. I drilled mine on a mill but a drill press will work just as well. Bend a bracket (vise and hammer=poor man's brake) so it will bring the lever level and into position. There ya go.
PULL YOUR WAY TO FREEDOM.
That is sweet setup. I may have to give this a shot on mine. It won't look nearly as cool, but in the couple months I've had the push button set up I have burned my hand enough times to think this may be the ticket.