92 sportster 1200 front wheel

[rabies]

long story short.
front tire is junk so i bought a nice front wire wheel with new tire
along with a rear wire wheel too.

guy said will fit sporty (ik thats not very specific).
wheel doesnt fit.

heres what i have.
my 92 mag wheel has smaller OD wheel bearing. the wire wheel is a larger OD bearing.
the mag wheel has a inert cupping to fit the speedo cable thing/spacer.
i could go without the speedo cable thing and ditch gauges( want to anyways) but i need that space filled in.

mag wheel inner wheel bearing is 29mm
wire wheel is 19mm.

would be great to just swap wheel bearings but the OD is dif.
also does anyone know what wire wheel this is from? that would help alot.
both wheels are 19s
also rotor bolt spacer would fits but inside rotor hub is too space doesnt fit wire wheel.

92 mag wheel left side


mystery wire wheel left side


92 mag right side (this side is fine)


mystery wire wheel right side (nice looking hub)

[JBinNC]

Your new wheel is a ball bearing wheel, 2000-up. You can use it on your bike. The wheels have a ball bearing available to fit your existing 3/4 axle. You will have to make up axle spacers to center the wheel in the fork. You can bore your brake rotor to fit; the bolt hole pattern is the same. Or, you can buy a 2000-up brake rotor.

Jim

[rabies]

your the man. thank you again sir.