The Killers Resurrection

[bnag0]

Doom,
My battery is actually accessible from the lower left side of the bike. Its in a wooden box. The rest of the main electrical is in the saddlebag on the rear of the bike. I shouldn't really need to take the seat off for anything unless I am pulling the oil tank out.

[bnag0]

Got the rear seat brackets and seat studs in tonight. Going to cut the front bracket/tab from stainless at work this week.

[bnag0]

Got the front seat bracket bung tapped. Decided to paly around with the yoga mat foam and the high density foam from Joanne Fabrics. The Yoga mat is roughly .50" thick but a little too firm. The green HD foam is too soft and at 2" thick its hard to work with. I think my plan is to go 3 layers of yoga mat and then try out some gel seat pad material i just ordered from Amazon...

https://www.amazon.com/gp/product/B012XXJ39A/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

[bnag0]

Got the exhaust modified with some turn out tips.

Starting to plan out the fender mount locations

[bnag0]

One of three fender connections complete.

[bnag0]

Sorry for the lag in updates, I threw my back out moving the kids bean bag in the living room lol.

Been taking it easy but I have a little progress on the seat. This is officially the first part on the bike that I have painted lol.

[bnag0]

Now to figure out a wrap

[bnag0]

Back is feeling a bit better, got on the floor and did some fitting for the fender. Going to bring the fender to work tomorrow now that all 6 bungs are at least fit on so I can have a friend (Who actually knows how to weld) tig weld them. Also got the front seat bracket bung in place. Going to stop at the local tailor/upholstery guy tomorrow with the seat to see what they can do for me. If they can get it covered in a week or two I will most likely let them tackle it.

[bnag0]

Happy Father's Day to all the Dads out there!

[DoomBuggy]

And some of you mothers as well.

[bnag0]

I should be riding this thing by the end of the week hopefully!

[bnag0]

Adapted old seat to new mounts temporarily.
Removed kickstand and cleaned up area
Pictures of foot and exhaust placement for reference.

[bnag0]

Had a friend at work tig weld the intake mount.
Got the new kick stand welded on
Made up a sissy bar, not sure how much I like it but needed something to mount my tail light and turns to (Not done yet)
Attached my plate to the saddle bag.

Really at this point I just need to rig up the rear lights and I should be good to go.

[bnag0]

Next stop road test.

Still need resistor for blinkers.

[bnag0]