Tracker project and I'm new here

[Rmbbikes1]

Hello chop cult. I've been lurking around for a while now getting tons of info from here for a build. Every question has been answered in one post or another. This site is awesome!!! So glad I found it.

Here's what I have going on in the garage right now. 1999 dual plug engine harness and suspension in a 1990 frame. If I can answe any question I'd be happy to.

A few pics of where I'm at. Again this sight is awesome!!

[TriNortchopz]

nice sprocket cover...where you mounting te master cylinder?
maybe one with a remote reservoir could be adapted; one example:

[Rmbbikes1]

Caliper goes in the original location.

[farmall]

Did that particular early frame require sidestand relocation for the (much improved) five-speed engine?

It's super easy to do but I'm curious which need it.

[45Brit]

My flat track Sportster has a 5 speed engine in an earlier frame, and it definitely has a non-standard kickstand mount with a very short kickstand. I’ve seen at least one article describing a similar swap which refers to this - I believe the 5-speed cases foul the kickstand lug?

[farmall]

I had to de-sidestand a ~1986 frame (it's been long enough I forget the year) but since 1990/91 was the transition I was curious since HD likes to use up old hardware.

[Rmbbikes1]

Sidestand still works