CHOP CULT HOME
Email Password
Search
  1. #1
    Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Dec 2018
    Posts
    83

    Default Shovelhead Hitachi Starter rebuild

    With a rebuild kit on order, im taking apart my starter this evening

    Click image for larger version. 

Name:	brt6W8Zl.jpg 
Views:	1 
Size:	49.0 KB 
ID:	108083


    I noticed the front cap came right off. I was figuring the cap, bearing and armature would come out as one unit.

    Click image for larger version. 

Name:	SvJsr9bl.jpg 
Views:	0 
Size:	49.0 KB 
ID:	108084


    A look in the cap shows the bearing spinning in the cap, i can fix this, but is this bearing press fit into the cap in normal practice, or to the armature? Harley discusses only briefly replacing the bearing if bad but does not get into the disassembly if everything was situated correctly.

    Click image for larger version. 

Name:	5YiHpyql.jpg 
Views:	0 
Size:	57.6 KB 
ID:	108085

    It also calls out two thrust washers on the commutator end of the armature HD-31584-73 I noticed I had the washers, assuming these are the ones called out as there are no dimensions specified in the parts manual. Mine are two different sizes.


    OD .981
    ID .463

    However...



    Click image for larger version. 

Name:	p7yAJQZl.jpg 
Views:	0 
Size:	49.2 KB 
ID:	108086

    and

    Click image for larger version. 

Name:	5U31Pt1l.jpg 
Views:	0 
Size:	52.5 KB 
ID:	108087


    The bushing on the end cap is completely shot, but part of the rebuild kit. If they are correct this is somewhat strange. Was their a specific endplay called out for the armature. I find no documentation as such.
    Last edited by jcrubin; 01-10-2021 at 9:09 PM.

Share This



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in