Bad-Boy 92 inch 1952 Pan
Collapse
Desktop Ad Forum Top
Collapse
Mobile ad top forum
Collapse
X
-
That's a very thoughtful offer ..
But do think I better run down the tests ..
One of those tests showed this problem ...
The lifter blocks are 76-up stuff and was on the motor when it came to me .. I did a check on the ware and gave em a green light for more miles ... Did order S&S chromoly pushrods cause the seat pressure is at 171# valves on seat and around 385 at hi-lift .. It had alum. ones in it ... Now here's the weird part, the tappets are not 48 to 52 ... See how much thread is showing ? Ok, alright, wanted holey lighting tappets for this motor anyways ... (Matches the CB and Gen idle gears, Lol)
" Now here's the weird part, the tappets are not 48 to 52 ... See how much thread is showing ?"
Lets see if that statement holds water ...
Going to pull the rear lifter block off and compare the tappets to a known 48-52 tappet ...Last edited by Dragstews; 04-18-2022, 9:56 AM.Take my 45 and outrun em all ..Comment
-
Well, if that shit don't stink !!
48-52 is on the right and what the 52 had in it on the left ..
AND ... They are .005" OS
... /// https://youtu.be/QblkQ-J6zio \\\ ...Last edited by Dragstews; 04-15-2022, 1:36 PM.Take my 45 and outrun em all ..Comment
-
-
-
300 mobile ad bottom forum
Collapse
Comment