Tweet
Starting another new build. As usual im using a cone shovel motor and ratchet top 4 speed trans. I don't have a ton yet to start with but i have....
-Neck casting with title
- seat post casting
- original motor and trans castings ( front motor mount, rear motor mount, front trans mount
- rear axle castings
everything else ill be making, its going to be a 1" tube frame except for the back bone and seat post tube, doing straight leg down tubes as well but no side car loop castings.
Ill throw a few pictures down below, This neck casting looks as if it was smacked with a hammer so i started by welding up the hammer marks in the neck, tweaked shit from back in the day never surprises me anymore.
-Neck casting with title
- seat post casting
- original motor and trans castings ( front motor mount, rear motor mount, front trans mount
- rear axle castings
everything else ill be making, its going to be a 1" tube frame except for the back bone and seat post tube, doing straight leg down tubes as well but no side car loop castings.
Ill throw a few pictures down below, This neck casting looks as if it was smacked with a hammer so i started by welding up the hammer marks in the neck, tweaked shit from back in the day never surprises me anymore.
Attached Files
Comment