Pegs for 81 lowrider

[bigrob0813]

Cannot find anything to fit my mounts, I could modify a set but anyone know where I can get female mount pegs that fit these?

[Tattooo]

^^^^^ Now that's different ^^^^^^^

[flatman]

Will the big fat round pegs with the stock rounded male stub work? Unbolt the big round peg from the mount and bolt it on your mount? If the peg is to wide a couple of washers on the inside? Just a thought....

[bigrob0813]

I have multiple female pegs from different set ups, its like they are all too deep because this peg mount hole is so close to the end. Best I can come up with is to chop the depth off of a set of pegs and drill a hole closer to the end....or just replace the stupid mounts.

[Guest]

i think this is the type you need, loads on the bay of fools....

[Tattooo]

i think this is the type you need, loads on the bay of fools....

That looks like what he needs alright. I still say those mounts are new to me. That might have been a one year thing I don't know...............

[MOTher]

That looks like what he needs alright. I still say those mounts are new to me. That might have been a one year thing I don't know...............

50939-52 is the part # for those pegs /w rubber (50946-52 for just the steel part and 50940-52 for the replacement rubber cover.) Used on K models and Sportsters from the beginning and on FLH as passenger pegs, also used on most FX. For some after '69 there's a chrome end cover. I probably have 8-10 pairs in my stash-o-stuff, including one pair that's about 1" longer than the others. Also available with white rubber.

There was also an aftermarket set that fits those same mounts, chrome with o rings, You can find them at swap meets or online, but you usually have to replace the o rings.

[Tattooo]

There was also an aftermarket set that fits those same mounts, chrome with o rings, You can find them at swap meets or online, but you usually have to replace the o rings.

I was talking about the mounting bracket that I have never seen. I also have many of those pegs.......

[bigrob0813]

Yess you want to get rid of them?

[bigrob0813]

Thanks yall