attached are photos of what I've put together for my theoretical Bobber GL1100 wiring diagram. Also is the original. I've removed ALOT. Basically all that's left is (Ignition switch, starter switch, Fan/temp gauge, Rectifier w/ regulator, alternator, Pick-up coil, Starter/battery, Starter solenoid i.e. magnetic switch, and ignition coils/spark units) I've also done away with the fuse box and added an inline fuse (unsure is 10 amps is enough)
I'm newer to wiring so I made this to get some eyes on it and thoughts before making any sudden changes. I've left some comments on the diagram and would LOVE some input and feedback! Thank you in advance, no advice or input is to small, want to do it right, and do it once.
I'm newer to wiring so I made this to get some eyes on it and thoughts before making any sudden changes. I've left some comments on the diagram and would LOVE some input and feedback! Thank you in advance, no advice or input is to small, want to do it right, and do it once.
Comment