CHOP CULT HOME
Email Password
Search
  1. #1
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Nov 2011
    Posts
    594

    Default Casting Tcme Lense

    So I might have made a small mistake. I bought a TCME taillight on eBay this weekend for DIRT CHEAP. Now I noticed in the pictures that the lense is melted a little on the bottom but I'm not too worried about that. I'm hoping to heat it up a little and try to move it back into shape. I looked over the pictures again today (after getting the "its been shipped" email) and I think the lense is cracked. I'm hoping the lense isn't too far gone because I'm going to try and recast/mold it and possiblly make custom replacements. Once I get it in, I'll post tons of pictures and updates on progress.

  2. #2
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Apr 2013
    Posts
    9,296

    Default

    Excellent! I've seen info on the internet but never done it myself.

    It would be interesting to know the most rugged and UV/fade resistant lens material.

  3. #3
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Nov 2011
    Posts
    594

    Default

    This is gonna be a trial and error thing too dude.

    So I got the light in today and my suspicious were correct, the lense is cracked. The heat warpage is a little worse too. I'm going to try and glue the broken piece back in place today and MAYBE start the mold.

    Click image for larger version. 

Name:	20210914_131822.jpg 
Views:	0 
Size:	303.2 KB 
ID:	105386Click image for larger version. 

Name:	20210914_131834.jpg 
Views:	0 
Size:	299.8 KB 
ID:	105387

  4. #4
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2012
    Posts
    340

    Default

    I've had the bad lens problem on a box taillight before. What I did was find a car taillight lens that was flat and big enough to cut the size I needed out of the center, then cut, and sand it to shape, and drill it carefully. Worked for me 'til I sold that bike.

  5. #5
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    May 2019
    Posts
    1,035

    Default

    Quote Originally Posted by MOTher View Post
    I've had the bad lens problem on a box taillight before. What I did was find a car taillight lens that was flat and big enough to cut the size I needed out of the center, then cut, and sand it to shape, and drill it carefully. Worked for me 'til I sold that bike.
    Along those same lines ^^^

    https://straight-eight.com/product/p...r-tail-lights/

    I hate to mention the "A" word, but there's a lot of generic lenses there with the sizes listed. Maybe you can shave one?

    Example:

    https://www.amazon.com/Optronics-A16...646959&sr=8-82

  6. #6
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Nov 2011
    Posts
    594

    Default

    Trying to fix part of the lense was a bit of a success. I was able to fix the top "bubble" part by making it flatter. Yes I burned the lense but again, I'm going to recast it later. Also, the glue held the small broken piece well.
    Click image for larger version. 

Name:	20210914_220303.jpg 
Views:	1 
Size:	266.4 KB 
ID:	105400

  7. #7
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    May 2019
    Posts
    1,035

    Default

    Cool.. A LED bulb would probably be easier on it temperature wise, in the future.

Share This



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in