Bad-Boy 92 inch 1952 Pan

[Dragstews]

How do ya feel about a low-ish compression 84" .... ??

Have ya fell into a barrel of shit lately ... ??



This crank is Plug & Play for your motor ...
4-5/8" stroke, 3-7/16" + .030" bore = 87 cubies

Came out of the 52 that's now 92 cubes .... Didn't have the heart to break it down being we was going with the Carrillo rods ...
All S&S stuff, most likely they sold it complete ... I could call in the numbers and fine out if it was them that did the assembly ??

All of what you see is what you will get ...
You'll be smelling like a Rose with the deal I'll throw at ya .. !!

BTW ....
Your 48 right case is from the 50-52 era cause the 48 & 49 had leftover casting from the Knucks ...

[rockman96]

Objective is a comfy torquey cruiser to be ridden gently but not suck on the highway. I've got newer bikes to thrash so this will be ridden gently.

Have ya fell into a barrel of shit lately ... ??

[ATTACH=CONFIG]105913[/ATTACH]

This crank is Plug & Play for your motor ...
4-5/8" stroke, 3-7/16" + .030" bore = 87 cubies

That motor would definitely NOT suck on the highway. No boring of the cases or heads either. You would have a peppy, long-lived motor... Go for it farmall!

[Dragstews]

.................................. HOT DEAL .................................


... /// https://youtu.be/enuOArEfqGo \\\ ...

[farmall]

No barrel of shit here, just another old motorbike engine needing a home and thanks to back surgery (mostly) working out I can get enough sleep to push more projects. Objective is a fun bob job plain and simple. Those Edlund frames look mighty interesting too as this sure ain't no resto.

Call 'er in then shoot me an email. If there's any remote reason to break down the crank for inspection that's cool too. Consider the parts reserved (earnest money deposit no problem because I'm in earnest!). I can drive the engine down from SC after Daytona and yet another build thread may begin.

Something clean and traditional like this classic would be a nice outcome:

[Dragstews]

If there's any remote reason to break down the crank for inspection that's cool too.

Man, the crank is like new ... I didn't do a check in the truing stand for runout, but the motor was a running motor so most likely it's on the money especially if S&S did the build up on it .. ??
Jugs & pistons also shows no signs of ware ...


Ya known, I think I'll call em up with the numbers and get the scoop on when, where and who ..





... Hang Tight ...

[Dragstews]

Well, that sucks .. !!

S&S was well know for keeping records on products that they sold ..
But, now that's out the window due to new and improved computer system ...

Gave em the numbers and they said "That's Old" ... I already knew dat .. !! .. Lol

[Dragstews]

farmall do you have a Facebook account .. ??

We can chat there Mug to Mug ... Just like the Jetson's ...



No typing involved .. !!

https://www.facebook.com/Dragstews/

[Dragstews]

Looks like farmall will be riding a stroker ...

[flatman]

we want to see a pic of it done and Farmall styling in his pink and purple rad outfit! LOL

[Dragstews]

And Farmall styling in his pink and purple rad outfit! LOL

They must have let Ronald McDonald out of jail ....
Herald they arrested him at Wendy's ...
He was trying to put his "Quarter Pounder" in Wendy's "Hot & Juicy" ...

[Dragstews]

Back to sanity .....

A motor 70 years old you can expect alum threads to give up the ghost ...





Back to better than what was ...

Wanted to get both the C.B. and Gen Idle gears on low specs for end-play ...
Going to spin a few spacers out on the lathe ...

[DoomBuggy]

Those Edlund frames look mighty interesting too as this sure ain't no resto.

I am digging the Edlund frame myself, very clean and well made.

[rockman96]

Looks like farmall will be riding a stroker ...

Awesome!

[Dragstews]

Trimmed off .030" more from the C.B. gear for the swing of the cam lobe ...



Won't be needing the frog hair now ...
___________________________________________

Oil pump loaded on nice, good finger spin ...

[Dragstews]

Rods are dead center to the bore, gotta love dat ...



It's glue time ...

Did a check on the lash of cam gear to pinion gear ..
Reused the old pinion gear that came out of this motor ..

Gotta say Thanks to "Justin Leienweber & Pop" ... The lash check was right on the money, couldn't ask for a better fit ...