CHOP CULT HOME
Email Password
Search
Page 2 of 2 First 12
  1. #21

    Join Date
    Sep 2017
    Posts
    429

    Default

    yea grind that hump down.

  2. #22
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default

    All this work is just for the look, what pleases the eye. ..

    When I built my 52's tranny I used a Jammer ribbed kick cover ..
    Had it mock up on the bike and was eyeballing what to me was a spot that just didn't fit the rest of the build ..

    So .... I got the tig torch fired up and started filling up that spot on the kicker cover ..
    Here's what was going on ... The cover had a dip in it as all kick covers has for the rear exhaust pipe to join up with the front pipe at the Y ...

    I'm running dual pipes with the rear going over the top of the tranny not running down in front of the kick cover ... I fill that area up and chromed it...


    (Photo courtesy of Chopper Dave)

    Ya know to this day I don't recall anybody making mention of that mod .. !!

    Kinda the same deal with the relocated rocker box oil lines ...
    Lot of work to pull off those mods and only I know that it didn't come that way from the Mo-Co ...
    Last edited by Dragstews; 08-12-2021 at 12:17 AM.

  3. #23
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Jul 2017
    Posts
    134

    Default

    Dragstews hasn't sent me a place to send the two items. If somebody else might have any uses for them let me know. I hate to toss em in the recycling bin..

  4. #24
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default

    Quote Originally Posted by golfish View Post
    Dragstews hasn't sent me a place to send the two items. If somebody else might have any uses for them let me know. I hate to toss em in the recycling bin..
    Thought that I did ..... (Never grow old) ...

    ... /// https://www.google.com/search?q=drag...hrome&ie=UTF-8 \\\ ...

  5. #25
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default



    The mother load ... !!

    Click image for larger version. 

Name:	237948171_1047033492702145_111167229542304174_n.jpg 
Views:	118 
Size:	10.9 KB 
ID:	105085



    The Baker Straight kick arm looks pretty kool on the C-P 4-speed ...

    Last edited by Dragstews; 09-02-2021 at 3:52 PM.

  6. #26
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default



    Got all the needed parts to sweat in the case ...
    Wanted to get this out of the way before the shine was done ...

    Now for a tad of fun ..

    Last edited by Dragstews; 08-30-2021 at 7:00 PM.

  7. #27
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default

    OK ...



    Do you see what I see .. ??

  8. #28
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default



    Found a stash from Dixie ...

  9. #29
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default



    Well Poo .. !!

    Gotta hone the I.D. of the sprocket spacer out a wee bit ..
    Won't slide over 4th gear ...

    "Welcome to the World of Custom"
    ________________________________________________

    Close ...



    But no cigar yet ...
    Spacer been harden, honing it is slow go ...
    ____________________________________________

    Got it honed for a slip fit, that allowed for me to set up the drive gear end play ..
    Factory speck is .003" to .013"



    I'm at .008" .. That part of the build is done ..

    Time to load the mainshaft with all parts and run down a few checks ...
    Third gear end play will be dial in ...
    _____________________________________________

    This is not final assembly ..
    What I'm doing is getting the tranny set up on specks then will take it apart for doing the polish.
    Doing it this way is less chance of bogeying the finish while working on it ..
    The work has already been done and only needs to be put together ...

    Last edited by Dragstews; 09-10-2021 at 5:46 PM.

  10. #30
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default

    Changing gears here for a moment .. (Pun intended)



    Although this ^^ would change the gears without a problem ...

  11. #31
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default



    Dang small parts are many in a 4-speed tranny ..

    Was thinking I had all of them in stock, but nope, needed the thrust washers and clips for the countershaft ...

    Last edited by Dragstews; 09-25-2021 at 3:18 PM.

  12. #32
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default

    Time to shine ....


  13. #33
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default


  14. #34
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default

    Time to put this puppy together ....









    ... /// https://youtu.be/K0xTs2PZJ5M \\\ ...
    Last edited by Dragstews; 12-08-2021 at 9:40 PM.

  15. #35
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default

    Found out the owner wanted to run a speedo, so another wait for ordered parts to show up ..



    Drive & Driven gears are re-pops and nets a 2:1 drive ratio ..


  16. #36
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default

    These two C-E Gens are going to be chromed ..



    The black one came from the 52 I'm building ..
    Other one is new ...

  17. #37
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default

    Lot of new in that box ...













    Last edited by Dragstews; 12-22-2021 at 8:54 PM.

  18. #38
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default



    Got the detent bolt for the Baker N1 lid sent to be plated ...

    When it gets back to me this puppy be done ....

  19. #39
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    12,934

    Default









    Two ^^ be done .....



    And one to go .. !!
    Last edited by Dragstews; 4 Weeks Ago at 4:31 PM.

Share This



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in