Email Password
Page 2 of 2 First 12

Thread: Springer ID

  1. #21


    Think your right about the threads so maybe the nuts are just reversed. That big cap nut should go on the top tree as it has a shoulder on it that seats into the tree and the jam nut goes on the underside of the lower tree.

  2. #22
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player

    Join Date
    Dec 2017


    Yup, spigotted top nut and crown nut, top nut below upper tree for bearing adjust and crown nut to lock top tree.
    Click image for larger version. 

Name:	springer or girder  bearing and upper nut assembly.jpg 
Views:	2 
Size:	285.1 KB 
ID:	101680

    Both should have a spigot which fit into the center hole of the top tree so the two pinch bolts on the upper tree lock them in place.

    pull that bottom 'unique' nut off the bottom and let us know the thread inside that.
    Last edited by TriNortchopz; 04-05-2020 at 12:06 AM.

Share This

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Log in

Log in