CHOP CULT HOME
Email Password
Search

Thread: CB550 Chop

  1. #1

    Join Date
    Apr 2017
    Posts
    6

    Default CB550 Chop

    Hi,


    I'm located in the UK - I bought a really ugly CB550 chop for a good price. I really like the CB550 engine.

    I've hit a hurdle with the front end. The bike has stock triple trees, but some forks from a Yamaha, and a 21" dirt bike wheel with a small drum brake which is pretty cool.

    Sadly the PO has done some shit engineering to make this work, loads of spacers on the axle, and parts of the drum brake shaved off, the brake stay doesn't reach the forks so he's put a bolt through it with a nut on (will provide pics at some point)

    The forks on it are 34" and I believe that stock cb550 forks are 28"?

    I've been looking for a 1976 GL1000 front end as i've read that these are a direct swap but they seem to be pretty rare in the UK.

    Anyone got thoughts/advice on where to go with this?
    I don't think I will have enough clearance for the frame/exhaust if i drop down to stock forks...

    I like the look of the current set up, but I'm not happy with the integrity of it...
    and I think i probably want a disc brake.


    Before pic
    Click image for larger version. 

Name:	bike1.jpg 
Views:	29 
Size:	21.5 KB 
ID:	99095


    Current progress
    Click image for larger version. 

Name:	bike2.jpg 
Views:	28 
Size:	78.1 KB 
ID:	99096

  2. #2
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2012
    Posts
    11,752

    Default

    Looks nice........... A 550 motor is a really nice motor.............

  3. #3
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Dec 2017
    Posts
    2,428

    Default

    Not so ugly...from a distance, you can see more than us.
    Lots of options for a simple fork leg/front wheel swap as the 550 has 35mm tubes, same as Honda 650, 750, CBX, Yamaha xs650...for easy longer than stock forks, XL and Xr honda forks are also 35mm, a simple slide in, but a bit more adapting for a disc...unless you get a fork and wheel with a disc from another model with 35mm tubes; see link to list below:

    Fork tube Diameters list
    https://www.dotheton.com/index.php?t...rs-list.20950/

    In the first pic, it looks like that was a 4-1 exhaust with a muffler on the right side...are you gonna run 4 into nothin'? If so keep the pipes in the same order and have all 4 pipes in original location, so they fit right.
    Last edited by TriNortchopz; 12-23-2019 at 8:41 PM. Reason: pipes

  4. #4

    Join Date
    Apr 2017
    Posts
    6

    Default

    Quote Originally Posted by TriNortchopz View Post
    Not so ugly...from a distance, you can see more than us.
    Lots of options for a simple fork leg/front wheel swap as the 550 has 35mm tubes, same as Honda 650, 750, CBX, Yamaha xs650...for easy longer than stock forks, XL and Xr honda forks are also 35mm, a simple slide in, but a bit more adapting for a disc...unless you get a fork and wheel with a disc from another model with 35mm tubes; see link to list below:

    Fork tube Diameters list
    https://www.dotheton.com/index.php?t...rs-list.20950/

    In the first pic, it looks like that was a 4-1 exhaust with a muffler on the right side...are you gonna run 4 into nothin'? If so keep the pipes in the same order and have all 4 pipes in original location, so they fit right.
    Hi,

    Thanks for the info.
    I like the idea of the XR/XL swap - wonder what the dirt bike front ends ride like though.


    I have a set of cocktail shakers that I was going to build onto the exhaust with 2x 2-1 collectors, but I haven't got around to it yet, as I need to find some chrome headers to make it all look right. So for now im leaving it as 4 pipes, not sure how that will go though.

  5. #5
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    May 2018
    Posts
    900

    Default

    I would change the front wheel to a Honda or Yamaha Disc brake front wheel and lower the forks in the triple clamps a little.

  6. #6
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Dec 2017
    Posts
    2,428

    Default

    I see that the XL/XR, CB550, CB650 and CB 750 (plus many others) have 15mm front axle, so this will help with wheel swaps:

    Amazing List of Fork Tube Sizes, Neck Bearings, axle Diameters

    https://www.customfighters.com/forum...ad.php?t=29199

    Thinking the XL/250 would be a good fit.

    A few comments here (pg. 109) about xl tubes in cb750 lowers, and seal swaps:
    The Honda XL (and other vintage singles) thread!
    https://advrider.com/f/threads/the-h...24841/page-109

  7. #7

    Join Date
    Apr 2017
    Posts
    6

    Default

    Thanks for your help guys.
    I've managed to score a stock cb550 front wheel with disc, and a set of 34" stock forks for them...will post pics when the forks arrive

  8. #8

    Join Date
    Apr 2017
    Posts
    6

    Default

    Click image for larger version. 

Name:	IMG_6933.jpg 
Views:	3 
Size:	294.3 KB 
ID:	99884Click image for larger version. 

Name:	IMG_6936.jpg 
Views:	6 
Size:	293.3 KB 
ID:	99885
    Quote Originally Posted by Maxmac View Post
    Thanks for your help guys.
    I've managed to score a stock cb550 front wheel with disc, and a set of 34" stock forks for them...will post pics when the forks arrive
    Finally got the over stock front end and stock front wheel, all seems much better. just need to rebuild the caliper for the disc now.

  9. #9
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Dec 2017
    Posts
    2,428

    Default

    Looks good, how much is that frontend extended?

  10. #10

    Join Date
    Apr 2017
    Posts
    6

    Default

    Quote Originally Posted by TriNortchopz View Post
    Looks good, how much is that frontend extended?
    I suppose 6".
    stock is 28, those are 34.
    Also now back on a stock wheel at 19 instead of the 21 that was on before.

Share This



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in