CHOP CULT HOME
Email Password
Search
  1. #1
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Mar 2012
    Posts
    179

    Default Kraft tech adjustable swingarm

    Considering picking one up for my 4 spd frame. Anybody have any experience with them? pros? Cons? Thoughts?

    Click image for larger version. 

Name:	51+xUUB3sJL._SX466_.jpg 
Views:	2 
Size:	13.8 KB 
ID:	97932
    Last edited by markwade74; 10-26-2019 at 1:35 AM.

  2. #2
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Apr 2013
    Posts
    8,666

    Default

    Should work fine. Some folks don't want to move shock mounts or install shorter shocks and that's a quick way around the problem. Run it raw to figure out what setting you want to keep, remove and paint. If the hardware ever loosens up for some odd reason, weld the blocks in place.

    I'd Loctite the screws holding the mounts and anti-seize the unused holes using a can of dry film lube (not paste anti-seize which is oily and would stop paint from adhering) so you can get the plugs back out. Alternate option, bondo them over and heat with a torch to melt out bondo if you ever want to move the shock mounts.

Share This



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in