CV carb fuel inlet removal
Collapse
Desktop Ad Forum Top
Collapse
Mobile ad top forum
Collapse
X
-
Comment
-
Same gig as your puller but a bit diff. design ....
It does the pulling and pressing the new inlet back into the carb body.
Mike Hamburg
Burg's Tools
847-772-2283
[email protected]
___________________________________________
Also a Press In 360* replacement inlet is available ..
That tool is rad!Comment
-
I like to use the square bodied brass replacement and a quality vice to press the new inlet in. I have a piece of hardwood that has a cutout in it (goes around the accelerator pump linkage) so it sits flat against the opposing side of the fuel inlet. That helps keep everything square and protect the carb body while pressing the new inlet in.Comment
-
Jesse and I got banned because of the moderators ego not because of our post so get your facts straight.........
Isn't it funny that you just did what your accusing me of??????????? At least I was addressing a post.......
Oh by the way do you have anything useful to add to this thread???????Last edited by Tattooo; 08-24-2019, 8:36 AM.Comment
-
Come on, Fellas ... Play Nice ...
________________________________________
Indeed it is ....
I bought this one from the "Late Ron Trock" when he first put it on the market ...
Works just as well as it did the first time I used it so many years ago...
Detailed destructions are a bit long, if you would like to read what the (Long Winded Fella) had to say, I can scan them to print ..Take my 45 and outrun em all ..Comment
-
-
I got out of the JJ boat along time ago while it was still sinking....... Anyone still there made it to the life boat.........Last edited by Tattooo; 08-24-2019, 1:19 PM.Comment
-
Come on, Fellas ... Play Nice ...
________________________________________
Indeed it is ....
I bought this one from the "Late Ron Trock" when he first put it on the market ...
Works just as well as it did the first time I used it so many years ago...
Detailed destructions are a bit long, if you would like to read what the (Long Winded Fella) had to say, I can scan them to print ..
That would be cool. I'm always interested in that kind of stuff!Comment
-
As am I, though your method is fast, easy and everything is available including the bushing at any local hardware store for dirt cheap. It wouldn't be difficult to copy the Trock tool if desired.Comment
300 mobile ad bottom forum
Collapse
Comment