Wondering if there's a right or wrong way here? trying to center my wheel with a 63-66 Juice drum on a haifley pan rigid hardtail replica. This is for a 72 Shovelhead build.
..I've read a few convo's throughout the internet including one on CC regarding the topic. from what I gather, most folks center their wheel by measuring the distance between the hub and axle plates on either side and adding/subtracting spacers where needed.
I've also read starting at the motor, lining up the tranny to the motor, then using a straight edge from the tranny sprocket to the Juice drum face plate. From there you will add/subtract the spacers you need.
(also curious if anyone can recommend the lowbrow spacer kit for 17mm)
thanks for any help!!
..I've read a few convo's throughout the internet including one on CC regarding the topic. from what I gather, most folks center their wheel by measuring the distance between the hub and axle plates on either side and adding/subtracting spacers where needed.
I've also read starting at the motor, lining up the tranny to the motor, then using a straight edge from the tranny sprocket to the Juice drum face plate. From there you will add/subtract the spacers you need.
(also curious if anyone can recommend the lowbrow spacer kit for 17mm)
thanks for any help!!
Comment