BBQ whores another bike from Davestune

[Bbqbiker]

So i ask bbq what color are you going to oaint it last night,
His reply, Oh im going to rattle can paint it.
Another bike screwed up...

I can shake that can of Home Depot black paint as good as anyone....unless I use a brush for some cool texture...
Bikes gonna be about 10lbs lighter and much faster with all that metalflake sanblasted into oblivion.

[Dragstews]

On a lighter note (To say the least ) the "Staff Sergeant" will join up with our gang of merry misfits and do a build thread on his Knuck project ..

Y'all welcome him aboard when he does, will ya .....

[Davestune]

I can shake that can of Home Depot black paint as good as anyone....unless I use a brush for some cool texture...
Bikes gonna be about 10lbs lighter and much faster with all that metalflake sanblasted into oblivion.

Again with his fuckery.
I will paint your tins
I'm not going to get into it I just can't handle a this barbarian anymore
P s your a fat fuck

[farmall]

Of course with the paint off that's a good time to stretch the frame for a 145" Twin Cam and no one can tell if you run these kool kovers:

https://viciouscycleworks.us/Category/pancovers

A Thunderheart will let you run an S&S G for vintage koolness even Avestuneday couldn't tell from original.

[Bbqbiker]

I stole this tank from Davestune’s shit pile and now it has been blasted clean of all his red paint with flame metal flake fuckery. Gonna hit Home Depot today they have a Xmas special on black spray paint 2 for $5 so that will give me plenty to do the tank and rear fender. Black of course....



Old tank is like 1.7 gal and this behemoth is maybe 2.5? It will be nice to have a little more range I think I could get 60 miles out of the smaller tank maybe I can get 100 out of this one. This will give me more time on the highway to hammer this pig and see what it can take.

My rear wheel covers came in too..thus turd is going to have a nice metamorphosis when I’m done with it

[nuklhd]

BBQ, do you have to cut you own brake side in that cover?

[Tattooo]

BBQ, do you have to cut you own brake side in that cover?

Ok I'll do it...... Cut what???????? LOL

Nothing will need to be cut.............

[Bbqbiker]

BBQ, do you have to cut you own brake side in that cover?

Instructions say it’ll have to be machined for the axle spacer that’s about it

[Tattooo]

Instructions say it’ll have to be machined for the axle spacer that’s about it

You won't have to turn out very much.............

[Dragstews]

Instructions say it’ll have to be machined for the axle spacer that’s about it

Don't cut the wheel cover, cut down the axle spacer instead ...

I made one up for the rear of my scooter ...



Using a Atlas front hubcap for a Springer ...

[Tattooo]

I didn't have to clearance any on the Queen............

[nuklhd]

On my covers thatright side one shown has the brake drum stinking out of it.

[nuklhd]

man I am lost but how do you slide an axle through with no hole?

[flatman]

nucklhead the cover on the right has a HUGE hole in it. it is big enough for the brake drum/backing plate. picture makes it look like it is solid (right one) but it aint

[nuklhd]

Darn flatman, my cancer must be affecting my eyes.