CHOP CULT HOME
Email Password
Search
  1. #1
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    10,910

    Default E-Z Pull Clutch Assist (Install)

    Fella just bought this scoot, has about 3,000 miles in the saddle..
    Said he was having trouble in town cause of the clutch lever was hard to work, OK ..

    Here's the cure for that ...

    Click image for larger version. 

Name:	IMG_2563.jpg 
Views:	1 
Size:	291.4 KB 
ID:	93971

    There are others that make a E-Z Pull, but for a little over 20 Bucks, this one works great..

    The Bike .....

    Click image for larger version. 

Name:	IMG_2564.jpg 
Views:	0 
Size:	301.6 KB 
ID:	93972

    To install the gizmo the trans end cover must come off ..

    Click image for larger version. 

Name:	IMG_2565.jpg 
Views:	1 
Size:	297.8 KB 
ID:	93973

    What being done here is adding a bit more leverage to the arm ....

    Click image for larger version. 

Name:	IMG_2566.jpg 
Views:	0 
Size:	293.5 KB 
ID:	93974

  2. #2
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    10,910

    Default

    Click image for larger version. 

Name:	IMG_2570.jpg 
Views:	0 
Size:	294.7 KB 
ID:	93975

    With the E-Z Pull installed, the cable housing will now be to short to work ...
    In the kit are two cable extenders .... One slips onto the housing at the cable adjuster, if the cable is made whereas it allows the cable housing to come apart... This one does not come apart so the spacer will need to go on the end of the cable that screws into the cover.

    There is the Oem O-Ring that goes on last after the spacer has been install.

    Click image for larger version. 

Name:	IMG_2571.jpg 
Views:	0 
Size:	288.2 KB 
ID:	93977

    I like putting just a bit of glue on the threads, makes for no leaks ...

    With the cover all back together time to lock & load.

    Click image for larger version. 

Name:	IMG_2574.jpg 
Views:	0 
Size:	296.8 KB 
ID:	93978

    Adjust the cable ...

    Click image for larger version. 

Name:	IMG_2575.jpg 
Views:	0 
Size:	281.5 KB 
ID:	93979

    And ... Done Deal ..
    Last edited by Dragstews; 05-24-2019 at 9:42 AM.

  3. #3
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2010
    Posts
    10,910

    Default


Share This



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in