Juice drum
Collapse
Desktop Ad Forum Top
Collapse
Mobile ad top forum
Collapse
X
-
Found this: Harley OEM Panhead Shovelhead Star Rear Juice Drum 58 - 66 #41409-58
And found this (rear though):
Panhead rear brakes 1958-1972 hydraulic.
In 1958 hydraulically actuated rear brakes were introduced.
Drums and sprockets
Early 1958 drums are stamped steel with 1/8″ rivet holes. 1-5/64 shoe. Same as mechanical brake.
late 1958-1959 are cast steel with 1/8 rivet holes.1-5/16 shoe.
1960-1962 cast steel with 3/16 rivet holes. 1-5/16 shoe
1963-1966 cast steel with 3/16 rivet holes. 1-13/16 shoe
1967-1972 uses drum designed for the later hub.
Backing plates, sprockets and many other components are drum year specific.
and this:
2014 Thread: Juice drum help please
"...I bought a drum with part number 41409-58A - it was a 63-66 star hub drum at 2-1/8" deep."
Needing to find a brake to bend and finish the rear section of my frame. Im going to be using a juice drum mounted on an invader, and trying to keep the rear section as slim as possible while still fitting the drum in there.(hopefully running the frame rails straight to the axel plates with no "offset" to clear theIf buildin' old school choppers was easy, anyone could do it... ain't nobody said it's gonna be easy...
300 mobile ad bottom forum
Collapse
Comment