Well underway is this project that I had initially thought was a burned up exhaust valve, which turned into so much more. Im documenting the entire adventure and will be posting as a series to my youtube channel in short order. As it stands, now, a bottom end rebuild, and some possible tranny work.... so it goes... its fun work...
Setting up for video work
Disassembly begins
Exhaust valve guide and seat
Rear piston, oil came from head downward
Front piston oil blow-by, victim of ring alignment caused by piston slap
Oil drain port vs. Gasket diameter [James]
Oil leaking through rear exhaust valve
Head reassembly after work done
Rocker polish 1
Rocker polish 2
Rocker polish 3
Rocker polished 4
Rocker polish rouge
Setting up for video work
Disassembly begins
Exhaust valve guide and seat
Rear piston, oil came from head downward
Front piston oil blow-by, victim of ring alignment caused by piston slap
Oil drain port vs. Gasket diameter [James]
Oil leaking through rear exhaust valve
Head reassembly after work done
Rocker polish 1
Rocker polish 2
Rocker polish 3
Rocker polished 4
Rocker polish rouge
Comment