Tweet
Hey CC. So I've had a number of questions online about my build (thread titled "1971 Sportster Ironhead Chop - Redo it Right") specifically regarding the electrical and wiring setup. I'm no pro but I did a ton of research and chose to do things for good reason as it relates to the wiring diagram design and how it was executed. Thing is... it gets really long winded to try to explain all of that by text and email. So, over the holidays, I decided to do a series of videos. The goal was to break it all down and outline what worked for me. I know there are a million opinions on wiring do's and don'ts. I'm positive that even my job could have been done better or cleaner. Point is - this design and installation works.
So check it out. It's a 3-part series and they are long (just over an hour all together). So if you are planning on wiring up an ironhead chopper... grab some popcorn and sweet tea and enjoy. Hope this helps one way or another. Here's part #1
Cheers!
So check it out. It's a 3-part series and they are long (just over an hour all together). So if you are planning on wiring up an ironhead chopper... grab some popcorn and sweet tea and enjoy. Hope this helps one way or another. Here's part #1
Cheers!
Comment