Triumph 650 micky mouse

[razorrichter]

This is a build I did over a few years on and off finally got it done so here are some build pics not great but it was fun just messing around

[razorrichter]

More

[razorrichter]

And more

[razorrichter]

Have more build pics but figured this was enough

[TriNortchopz]

This is a build I did over a few years on and off finally got it done so here are some build pics not great but it was fun just messing around

Looks like it was fun.
Was that a 10-10 kit on the front? Looks like raked trees. What was done with the front section of the frame - a whole new section welded in?

[razorrichter]

Looks like it was fun.
Was that a 10-10 kit on the front? Looks like raked trees. What was done with the front section of the frame - a whole new section welded in?

The frame at some point had been old school cut and comeAlong raked the original set up had the 10 10 kit I swapped it with a std front end and lowered it a few inches handles fairly well surprisingly

[Nanonevol]

Curious, what is a "10-10 kit"?

[TriNortchopz]

Curious, what is a "10-10 kit"?

It was a kit to make yourself a chopper at home; just bolt on the 10 degree raked trees and swap your fork legs to the 10" over tubes and instant chopper - the most common kit was made by Allied:
Cant post pics, so see the original ad and a kit here:
https://www.tapatalk.com/groups/hond...57416-s20.html

Of course with stock raked frame and 10 degree raked trees, this resulted in zero or negative trail, so high speed wobbles and crashes were the usual outcome.

I saw a lower raked tree from one of them kits on eBay yesterday - the guy called it a tree for a springer...not knowing.