Does Ultima Single Fire Ignition kit need compatible regluator?

[nwakely]

I have somewhat of a basket case project on my hands. I have a 1984 FLT frame with that year transmission, and am putting in a 1996 Evo motor into it.

I recently ordered the Ultima Single Fire Ignition kit with the coil included. My question is whether or not I need to have voltage regulator that is compatible to that ignition system? Or are many of the stator/regulator kits universal?

Thanks,
Nate

[rockman96]

The regulator is part of the charging system, not the ignition circuit.

[BadMonkeyMW]

The regulator is part of the charging system, not the ignition circuit.

Exactly. The regulator doesn't care what ignition you have, so you can use the Ultima no problem.

[Tattooo]

Exactly. The regulator doesn't care what ignition you have, so you can use the Ultima no problem.

Yes sir, As long as the battery has power it could care less if it's getting charged until the battery takes a shit...

[pan620]

Yes sir, As long as the battery has power it could care less if it's getting charged until the battery takes a shit...

And if you use a Ultima parts it will happen sooner that later, IMO

[rockman96]

And if you use a Ultima parts it will happen sooner that later, IMO

The ignitions are made by Dyna, right?

[Tattooo]

And if you use a Ultima parts it will happen sooner that later, IMO

Yes sir you got that right...

[pan620]

I believe they are, to Ultima specs not Dynas!!