CHOP CULT HOME
Email Password
Search

Hybrid View

  1. #1

    Default 6 over fork installation

    This is crossposted from HDForum, so, there you go.

    DISCLAIMERS:
    1) Buy/acquire a FSM. Everyone says this and it's a great thing to have. I have a pdf for 2004-2006 sportys if you want it.
    2) If norcal style chop isn't your thing, move on. I know it's gonna handle weird. #MakeEmWorse.

    The planets finally aligned and the TC Bros 6 over fork tube kit was in stock at the same time I had the cash to buy it. AFAIK, there isn't a thread of a step by step with pics of how to do this. If there is, kindly direct me to it, and I won't post this.

    After watching Delboy's YT videos, and reading the manual for tube dis/reassembly, I think I can safely do this mod in my garage, with a small lift and hand tools.

    Everything was delivered today, so I'll do the install tonight, and post a write-up with photos tomorrow.

  2. #2

    Default

    not my build but we always get stoked to see people working on their bikes. let see them pictures

  3. #3

    Default

    The manual lays everything out in better detail than I thought, and Delboy is an invaluable resource.

    1) loosen the top TT bolts and fork cap with a 1 3/8 wrench (what the hell, harley?)
    Click image for larger version. 

Name:	IMG_7522.jpg 
Views:	11 
Size:	296.3 KB 
ID:	82056

    1.5) no pic, but remove the wheel

    2) Use Hulkamania strength to remove the 10mm 12point (again, wtf, hd?) bolts on the caliper.
    Click image for larger version. 

Name:	IMG_7523.jpg 
Views:	5 
Size:	287.6 KB 
ID:	82057

    3) Before you drain the oil, break the seal on the piston, which is a hex bolt. I did it like this. Same principle as delboy, but a little easier for me than doing it bare handed. Remember not to remove the bolt at this time - just break the seal.
    Click image for larger version. 

Name:	IMG_7524.jpg 
Views:	11 
Size:	290.4 KB 
ID:	82058

    4) Now you can remove the fork cap, remove the spring, and upend the whole fork to drain the oil
    Click image for larger version. 

Name:	IMG_7528.jpg 
Views:	5 
Size:	283.9 KB 
ID:	82059
    Click image for larger version. 

Name:	IMG_7526.jpg 
Views:	4 
Size:	288.5 KB 
ID:	82060

  4. #4

    Default

    No idea why these images are upside down.

    5) Now you can fully remove the hex bolt securing the piston, little spring, and oil seal fitting by sliding them out of the tube. Using the same method as delboy and the manual, jerk the seal and glider bushing out of the fork leg
    Click image for larger version. 

Name:	IMG_7527.jpg 
Views:	11 
Size:	299.8 KB 
ID:	82061

    6) Have a beer and a smoke because, hey, you're half way done.

    7) This is the oil seal fitting. It goes between the piston, which is threaded and secures the hex bolt on the bottom of the fork, and the fork leg. Remember this orientation and keep in mind it is soft metal.
    Click image for larger version. 

Name:	IMG_7530.jpg 
Views:	5 
Size:	292.2 KB 
ID:	82062
    Click image for larger version. 

Name:	IMG_7531.jpg 
Views:	4 
Size:	294.3 KB 
ID:	82063

    8) Replace the bottom bushing to your new tubes, insert the oil seal fitting into the bottom of the fork tube, then slide the tube into the fork leg. Do it carefully, because that little fitting is a son of a bitch and he WILL turn loose and fall out of place at some point. You'll have to look down the tube to make sure it's orientated correctly or else you'll ruin it by jamming the fork tube on top of it and smashing it.
    Click image for larger version. 

Name:	IMG_7529.jpg 
Views:	7 
Size:	293.1 KB 
ID:	82064

    This is where pics stop, because I got excited and couldn't be bothered to take them.


    9) Use Delboys method to get your glider bushing wedged between the fork tube and the leg. It's not as easy as he made it look, but aside from buying the proper tool, it's the best way. The washer goes in after this, then the fork seal. One of my bushings was pretty badly warped by the removal process, so I had to buy a new one. Luckily for me, they're barely available online, and the nearest store that had them was a 100mi round trip. I love harleys.

    10) Use the same method for fitting the fork seal in place, then the retaining ring. Oh my god you're so close.

    11) Replace your dust cover, then the chrome cap that is pointless.

    12) Slowly slide the little spring and piston assembly down the tube and secure it with the hex bolt. You don't have to get it super tight at this time. Then insert the big spring.

    13) Extend the fork as far as it will go, and fill with oil.

    14) If you're not installing extended tubes, replace the fork cap. Congratulations, you've replaced a tube. put everything back together in reverse order of disassembly.

    15) If you're doing extended tubes because bitches dig longer tubes, insert the plastic washer on top of the big spring in the tube, then the PVC spacer. Then you can try real hard not to scream while you try to simultaneously depress the spacer and spring, while trying to thread the fork cap into the tube. This will make you hate your life.

    if you made it this far, lordy, you're done. Reassemble in reverse order of disassembly.

    I did this with hand tools, and a couple borrowed tools from a friend (the 1 3/8 wrench and the 10mm 12 gd point socket.) You can do it and be 33% more chopper.
    Click image for larger version. 

Name:	IMG_7534.jpg 
Views:	77 
Size:	316.2 KB 
ID:	82065
    Last edited by Theonlychrisj; 02-24-2018 at 11:25 AM.

  5. #5

    Default

    nice job man

  6. #6

    Default

    Quote Originally Posted by Theonlychrisj View Post

    6) Have a beer and a smoke because, hey, you're half way done.
    I appreciate all the info and your witty quips

    I'm finishing my +8 forks this weekend and will post photos if all goes well.

    Getting the springs depressed is as hard as stuffing an elephant into a bucket.
    Last edited by sportychops; 04-28-2018 at 10:58 PM.

  7. #7

    Join Date
    Apr 2013
    Posts
    13

    Default

    Farmall has a rig he made with a modified socket and a caulking gun to compress fork springs and get the cap back on.
    http://www.chopcult.com/forum/showth...pring+caulking
    Last edited by Arky403; 04-30-2018 at 8:29 AM.

  8. #8

    Default

    Quote Originally Posted by sportychops View Post
    I appreciate all the info and your witty quips

    I'm finishing my +8 forks this weekend and will post photos if all goes well.

    Getting the springs depressed is as hard as stuffing an elephant into a bucket.
    Hell yeah, dude. If I could do it again, I'd do 8 over

Share This



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in