I needed to work on some projects and didn’t necessarily need a lift just a decent table. Found a recipe on the interweb and here’s how it came out..
Coated every surface with Minwax “Helmsman” wood preservative and then a few coats of clear on the work surface to protect against the inevitable oil grease and whatever else.
I used galvanized 6” eye hooks for tie down points, thru-bolted for strength. Bought a couple wheel chocks off Amazon.
The whole table is on (6) 4” locking casters and can roll around the shop as needed to make way for other junk.
Table is 8’ long 2’ wide and 23.75 tall and I bought enough materials to make 2
Coated every surface with Minwax “Helmsman” wood preservative and then a few coats of clear on the work surface to protect against the inevitable oil grease and whatever else.
I used galvanized 6” eye hooks for tie down points, thru-bolted for strength. Bought a couple wheel chocks off Amazon.
The whole table is on (6) 4” locking casters and can roll around the shop as needed to make way for other junk.
Table is 8’ long 2’ wide and 23.75 tall and I bought enough materials to make 2
Comment