CHOP CULT HOME
Email Password
Search
  1. #1
    Junior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Jan 2015
    Posts
    12

    Default wiring starter motor

    I have a '10 sportster 48 i am in the process of rewiring from scratch. I have the rest of the circuit down but cannot get the starter motor to crank. Since running into trouble I have removed the rest of the wiring and am focusing on just getting the starter to fire. I am running a remote button mounted directly on the starter solenoid so I believe there is no need for the starter switch relay and am wiring it as follows.

    Button mounted on solenoid.
    Battery to starter +
    Starter - to frame ground

    When I hit the button I get nothing. Still getting a solid 10v on the battery so I feel like something should be happening. Starter worked last summer fine while we were putting 10k miles on the bike.

    what did I do wrong

  2. #2
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2012
    Posts
    12,345

    Default

    10v won't cut it.... What does your battery have under a load?????

Share This



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in