Fun stuff first, got the shifter arm all done and it works great could be a little more curvy for my likening but I don't have a torch so until I get it down to Joel's this is how it's gonna be
I think I might call this bike the heim joint cuz I have 5 of them on here at this point. Any way since I went with 1" bars and I didn't have a throttle cable I figure I could use a Harley on bit the barrel didn't fit in the crabs so I had to use one of those universal throttle cables, had to cut the sheathing back so the barel could make it all the way around to the right place and then had to come up with a way to hold the cable in place.
Cut this off a set of Suzuki carbs I had and welded it to the top of ......whatever that's called.
Throttle cable finished
On to the bad news I hadn't really looked into the exhaust at all until today and wondering what you guys think. The two outside ones are dry but the two inside are pretty wet and dirty. Joel says fuck it and I tend to agree so i guess I'm just wondering what would cause this bad seals? Blow by?
#4 cylinder
#3 cylinder
Comment