Replaced the clutches and got it all back together and the clutch will not engage. I can put it in gear and the rear wheel will not spin and if I pull the clutch lever it still does not spin. I did not soak the clutches before install so could the clutches just be sticking or ?????? Amy advise would help. Thanks
84 Shadow vt500c Clutch Problems
Collapse
Desktop Ad Forum Top
Collapse
Mobile ad top forum
Collapse
X
-
Or you didn't put it together right since you didn't take it apart.......... Again he ask.... Do you have a manual???????????Comment
-
Think I would pop the clutch back out and try to turn the hub with it in all gears. First and probably second you should be able to move the bike with your hand or at least a short cheater. If you can move it with the trans the problem is the clutch It you can spin the hub with out moving the bike the problem is the transmission. Let us know.
DustyDriving that train, high on cocaine
Casey Jones you better, watch your speed
Trouble ahead, trouble behind
And you know that notion just crossed my mind​Comment
300 mobile ad bottom forum
Collapse
Comment