I picked up a 63-66 juice set up for my Shovel in a factory wishbone frame. Bought the proper axle, did all the necessary spacing and lined everything up. New shoes, master and brake line. I'm using a banjo brake switch bolt. Installed the shoes and springs following the steps in my manual (proper year for the brake). Bled the brake (good pressure, stiff pedal). The brake rod is adjusted and not interfering with the master.

Here's my problem. The fkn thing is tight. Not just a little drag but it's hard to turn the wheel while on the lift. It seems to have a tight spot. When I engage the brake it stays engaged till I move the wheel back and forward. I've adjusted the shoes and nothing. Anyone experience this and found a solution?