CHOP CULT HOME
Email Password
Search

Hybrid View

  1. #1

    Join Date
    Nov 2013
    Posts
    18

    Default Panhead open primary install

    I'm looking for info on the BDL 2" open primary and clutch pack install instructions for my '53 Panhead. Can't seem to find anything anywhere and need torque specs etc...
    Thanks!

  2. #2

    Join Date
    Sep 2010
    Posts
    12,689

    Default

    If no one here can help you...
    Call BDL (714-693-1313)

  3. #3

    Join Date
    Oct 2013
    Posts
    1,208

    Default

    All kits comes with basic instructions. If you don't have them, they are available on their website. Torque specs are not listed as they always refer you to factory specs.


    Front pulley: 80-100 FT LBS. Clutch hub nut: 50-60 FT LBS.


    Don't forget a little red Loctite on these two. Make sure the threads are clean (wire bristle brush and brake cleaner or Loctite primer).
    Last edited by boomboomthump; 05-04-2016 at 8:57 PM.

  4. #4

    Join Date
    Nov 2013
    Posts
    18

    Default

    Thanks for the replies guys! It didn't come with any instructions or info whatsoever and the box had been previously opened.
    I'll do another search to see if i can find something.
    I've heard conflicting info on wether or not to lightly lube the clutch plates and guides. Any more suggestions on this?

  5. #5

    Join Date
    Sep 2014
    Posts
    1,485

    Default

    Here's my bdl 2" belt drive ins. from 2003.





    Attached Thumbnails Attached Thumbnails bdl 1.jpg   bdl 2.jpg   bdl 3.jpg  

  6. #6

    Join Date
    Nov 2013
    Posts
    18

    Default

    47str8leg, thanks for the pics, i'll scan them and have a read.
    Cheers!

Share This



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in