If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Yeahoo! Thanks Dusty! Sure enough The ground wire to the tail light was in bad shape. Soldered one to the bulb housing and mounted to the frame and viola! Thanks a billion.
-Dominic
Originally posted by jbswear
Also check your grounds. Again.
Then run each circuit on its own. You have a short or a bad connection somewhere.
Tweet
Comment