2015 GREASY DOZEN BUILDER COLLECTIVE! Parts, free stuff & a showcase for your build!

[fabwerkz]

Picked up wheel hoops for the turbo Honda short chop entry. 21 inch front 18x5.5 rear ....
We will machine our own hubs, design and water jet the centers. Everything will be tig welded together when complete.

[Sportster88]

So if I understand the rules right, the greasy dozen build doesn't start until February... Looks like some of the guys on here and Instagram are commenting like the bikes they are posting up will be their "greasy dozen" bike build... Am I not reading this correctly?

[FredoSNR]

So if I understand the rules right, the greasy dozen build doesn't start until February... Looks like some of the guys on here and Instagram are commenting like the bikes they are posting up will be their "greasy dozen" bike build... Am I not reading this correctly?

The bikes wont be selected until February, however, I don't think any of us are waiting to be accepted to work on our builds. I will update my build here until the bikes are selected, then I will either make my own thread for my build or just keep it on instagram.

[spidr]

Thats exactly it. Its starting a little later this year as well, but its not really about what you can build in XXX amount of time, its about what you can build period. Guys putting the together in their garages and shops, and thats why its not a buildoff, but instead a collective.

Post up pics, keep it going. Last year was a cool group, this year should be too.

[milunchbox]

Going to build a short chop drag bike. Should be quick going to punch out the motor to an 850 and make it least look like its going 100mph sitting still. This is what I have so far.

[JimmyBK]

I would like to enter the cafe racer group.
I have two bikes I could do the build on.
I'm a one man garage builder.

First is an 01 Sportster 883.


Haven't really started much of anything on it yet, but attached is my general plan for the sporty.


the other potential bike is a 76 Triumph T140v


My last build was on a 79 Ironhead


@jimmydeanhorn on instagram

[ROLLO]

Cone Shovel Build Short Chop

Trying to make up a little ground fender cut oil tank on building wheels .Long way to go

[TravisGrahamXsGs]

Cant seem to post pictures on here through my phone but its all there on instagram! @Travis_graham
Its an 83 xs650 heritage special i dragged out of the snow this winter and have been working on it in my living room ....so am i signed up yet?

[TravisGrahamXsGs]

Ps i will thanks the companys i buy parts from when i can actually afford them this bike is on a budget to say the least

[Bear]

S&S Joins THE GREASY DOZEN BUILDER COLLECTIVE 2015

Ok bros I'm super stoked and proud to announce S&S as our latest sponsor for the 2015 Greasy Dozen Builder Collective. I was honored to receive a call asking how they could help. The builders will be pleased with their generous contribution! Thank you @sscycle !
#thegreasydozen #greasydozenbuildercollective #GDBC #builtnotbought #oldbikebarn #chopcult #ifyoubuildittheywillcome #choppershit #bikershit -Bear
www.sscycle.com

[TravisGrahamXsGs]

Raw material! 1983 xs650 hetitage special

[image1]

little progress...

[IronManJr]

Ok bros I'm super stoked and proud to announce S&S as our latest sponsor for the 2015 Greasy Dozen Builder Collective. I was honored to receive a call asking how they could help. The builders will be pleased with their generous contribution! Thank you @sscycle !
#thegreasydozen #greasydozenbuildercollective #GDBC #builtnotbought #oldbikebarn #chopcult #ifyoubuildittheywillcome #choppershit #bikershit -Bear
www.sscycle.com

This is awesome news Bear!
The folks at S&S are sponsoring the AMRA again this year, they are great people who do a TON for the industry. Glad to see they are sponsoring the Build Not Bought movement of the Greasy Dozen!

[Bigchop]

Liked the throttle side so much, I couldn't help but make the other side match. Most of my bikes have tape grips, so I threw some on there to see how it looked.

[hlguthery]

Here is my entry.. I reposted the Greasy Dozen poster awhile back but just saw this thread. Hopefully I get picked it sounds like a great oppurtunity. Good luck to all.

Its a 1981 front half of frame and engine. We are setting it up with a modern 5 speed, starter and primary for reliablity (not to mention a better clutch and starter). Frame has been hardtailed and installed a late model sporty front end with 16x3 front wheel. Unfortunately it looks further along than it is, the sheetmetal is just sitting on it. Hopefully I will have more done next week.