Email Password
  1. #1

    Default Need Yamaha risers help!!!

    was wondering what handlebar risers are best and available to fit my 2007 vstar 650 with a 1" bar. any info would be much appreciated. thanks so much

  2. #2


    Any of them should fit, as long as the risers are made for 1" bars. Now if you are trying to go into stock holes and use bushings then just put those bushings on the new riser stem. If not then drill you some holes for the stems in the trees. But be very very exact when finding the center points horizontal and vertical when drilling new holes if you don't want crooked bars... and make sure there is some beef in the spot you plan for them, if not add a large washer to the bottom to help spread out the forces... it's a good idea to add the washer anyway to bushingless risers.

Share This

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Log in

Log in