was wondering what handlebar risers are best and available to fit my 2007 vstar 650 with a 1" bar. any info would be much appreciated. thanks so much
Need Yamaha risers help!!!
Collapse
Desktop Ad Forum Top
Collapse
Mobile ad top forum
Collapse
X
-
-
Any of them should fit, as long as the risers are made for 1" bars. Now if you are trying to go into stock holes and use bushings then just put those bushings on the new riser stem. If not then drill you some holes for the stems in the trees. But be very very exact when finding the center points horizontal and vertical when drilling new holes if you don't want crooked bars... and make sure there is some beef in the spot you plan for them, if not add a large washer to the bottom to help spread out the forces... it's a good idea to add the washer anyway to bushingless risers.
300 mobile ad bottom forum
Collapse
Comment