Hello,
The fork tube dampers on my 67 XL need replacement. One is bent, the other scratchy.
I learned the hard way that my sportster millesime is the last from K series. So cool, it's rare and the fork is correct. And skinny. Ok !
NOW how can I find for damper replacement ?
There is a newer one on http://www.debrix.com/33-4mm-Steel-L...24-0454-vt.htm but I don't see where the long fork spring and axle will go.
It's supposed to fit pre 1967 forks by drilling the bottom hole bigger. And that's it ?
Narrowend FX's 1971 & 1972 also share those forks but I can't even find a set of used damper tubes which is still the simplest solution.
Any advice or potential used parts sources in US or EU are welcome
Thib
The fork tube dampers on my 67 XL need replacement. One is bent, the other scratchy.
I learned the hard way that my sportster millesime is the last from K series. So cool, it's rare and the fork is correct. And skinny. Ok !
NOW how can I find for damper replacement ?
There is a newer one on http://www.debrix.com/33-4mm-Steel-L...24-0454-vt.htm but I don't see where the long fork spring and axle will go.
It's supposed to fit pre 1967 forks by drilling the bottom hole bigger. And that's it ?
Narrowend FX's 1971 & 1972 also share those forks but I can't even find a set of used damper tubes which is still the simplest solution.
Any advice or potential used parts sources in US or EU are welcome
Thib
Comment